IOPEDAL Installation Guides
Installation is quick & easy, follow our detailed PDL instructions or video guide to install the IOPEDAL module and pair with your vehicle.
IOPEDAL Installation Process
Step 1
Switch off the ignition, keep the key outside the vehicle and wait approx. 10 minutes. Then disconnect the plug from the accelerator pedal.
Step 2
Then connect the supplied cable to the accelerator pedal and finally to the vehicle’s original wiring harness.
Step 3
Then fix the cable and the IOPEDAL module in such a way that the pedals of your car are not affected. Use the supplied fixing material (adhesive pad and cable ties).
Step 4
After installation, switch on the ignition. With the first start-up of the IOPEDAL, the input signals of the accelerator pedal are analyzed (auto-ranging mode).
Step 5
Then slowly depress the accelerator pedal to the full throttle position and hold for approx. 2 seconds. Repeat this procedure 2-3 times. The system is then fully configured and a test drive can be carried out.
